The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control.Ħ. Press and release the MUTE button and the red indicator turns off. Press and release the TV button, for Volume/Mute control, the red indicator blinks then stays on.ĥ.

Press and hold the MUTE button until the red indicator blinks off, then release the button.Ĥ. Press and hold the SETUP button until the red indicator turns on, then release the button.ģ. Select the DTT-901 and turn the volume up to 100%.Ģ. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.ġ. If the device responds, no further programming is required. For an invalid code, the red indicator flashes.Ĥ. Note: after a valid code entry, the red indicator turns off. Enter the 4-digit code from the code tables (on separate sheet). The red indicator blinks and then stays lit.ģ. Note: after a valid code entry, the red indicator turns off.Ģ. Press and release the desired mode button (SAT, CBL, etc.). Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.Ģ. Here is how I set up the Philips remotes.ġ. The SRU3005/27 has some level of learning capability but I haven't bothered with it. The SRU3005/27 controls a DTT-901, a Sony TV, a Panasonic VCR, and a Panasonic DVD.

The SRU3003/27 controls a DTT-901 and a GE combo (TV/VCR). I bought a Philips SRU3003/27 (3 item) and when it worked I bought a SRU3005/27 (5 item). The Philips remote has good-sized buttons, a reasonable lack of complexity, and controls multiple devices. From what I have read, LG also branded this converter as an Insignia NS-DXA1.

Other people may have found remotes that work as replacements for the cheap ones that come with the DTT-901 but here are two that worked for me: the Philips SRU300X/27 series (simpler with bigger buttons) and the Sony RM-VL 600 (more complex but with full learning capabilities).

Zenith digital to analog tv converter